I hava a Polaris Autoclear Plus SWG. It is 6 years old and just replaced Salt Cell 30 days ago. It is now showing error code 91. I have been told there is a combination of buttons used to reset the unit. When I hold the test button it shows the salt level is 0000 but test strips show 3250ppm which is a perfect reading for my pool. Any help would be appreciated.
After trial and error i figured it out. Unplug power to unit, wait for all lights to go out. Then press and hold the "UP" and "PROGRAM" buttons while you plug unit back in. Continue holding while display shows 8888 and then will display program time to run. You should now be able to set water temp and adjust time to run. Test button will now display Salt Level.
How do you reset Polaris Autoclear Plus
Brand new Auto Clear Plus Salt Cell is not create clorine
My new Auto Clear Plus Salt Cell is not creating clorine.....any ideas why it is not?????
How do you reset Polaris Autoclear Plus
My salt cell didn't produce chlorine also turning my pool green. I replaced the fuse and the pool is sparkling again.
How do you reset Polaris Autoclear Plus
How is the fuse replaced? Does a code 91 failure on a polaris autoclear plus indicate cell or fuse failure
How do you reset Polaris Autoclear Plus
Pull the fuse out by removing the Philips head screw on the bottom of the unit next to the Cell Plug on a Polaris Auto Clear Plus. There will be a spare new fuse inside the unit. Remove the front display panel and the fuse will be taped to the inside. Code 91 is a Low Salt indicator. Code 94 is the typical code for a blown fuse.
How do you reset Polaris Autoclear Plus
i dont have any display sreen is blank, and all the lights are on, is this meapooln i need to replace the fuse?
How do you reset Polaris Autoclear Plus
help, Clorinator isnt working, my display screen is blank! does this mean i need to replace the fuse?
if so how and where is the fuse?
if so how and where is the fuse?
Return to “Salt Water Chlorine Generators, Ozone, UV”
Who is online at the Pool Help Forum
Users browsing this forum: Ahrefs [Bot] and 20 guests