Intex Saltwater System flow sensor connector

SWGs, salt water chlorine generators, chlorinators,
ozone generators, UV systems, . . .
bdcs64
I'm new here
I'm new here
Posts: 3
Joined: Fri 08 Jun, 2012 14:52

Intex Saltwater System flow sensor connector

Postby bdcs64 » Fri 08 Jun, 2012 15:08

I started to have code 90 "low flow" alarms and after trying everything in this forum, and buying a replacement flow sensor, I have realized that one of the female metal connectors on the plug for the flow sensor is missing.

I suppose it became damaged/loose and fell out after taking the flow sensor on and off so many times to clean etc.

I was wondering if anyone had a similar problem and was able solve/reapir on their own or had repaired by Inte (and if so, what was their experience and cost).

Thanks in advance for any help.


mig3

Intex Saltwater System flow sensor connector

Postby mig3 » Sun 01 Jul, 2012 16:11

I tried a bunch of things to try to solved but none works so what I did, I just bypassed the connectors with a piece of wire, and is working fine, I'm out of warranty anyways the worst thing can happens is to buy another chlorinator.

Return to “Salt Water Chlorine Generators, Ozone, UV”

Who is online at the Pool Help Forum

Users browsing this forum: No registered users and 9 guests