Strict Standards: Non-static method utf_normalizer::nfkc() should not be called statically in /home/havuzorg/poolforum/includes/utf/utf_tools.php on line 1663

Strict Standards: Non-static method utf_normalizer::nfkc() should not be called statically in /home/havuzorg/poolforum/includes/utf/utf_tools.php on line 1663

Strict Standards: Non-static method utf_normalizer::nfkc() should not be called statically in /home/havuzorg/poolforum/includes/utf/utf_tools.php on line 1663
How to sand plaster? - Swimming Pool Help

How to sand plaster?

Stains on the pool surfaces, pool equipment or on the swimmers, or off-color swimming pool water. Discolored but clear water.

How to sand plaster?

Postby Malia » Fri 03 Apr, 2009 12:03

I'm new to this forum and after exhausting internet searches I've yet to come up with a method of sanding calcium deposits off without harming my plaster. Has anyone here ever successfully done this? I originally planned to get a pneumatic orbital sander to remove it and then do a light acid wash. Is this the right method and if so, what kind of sanding disk should I use?
Thanks for any help.
Malia
 

How to sand plaster?

Postby Malia » Sat 04 Apr, 2009 10:33

Hmm...Guess I'm on my own.
Malia
 

How to sand plaster?

Postby Larry » Sat 04 Apr, 2009 12:02

We have never had any success with sanding despite trying a variety of disks and brushes. An acid wash can be tricky and dangerous, but it is the sole method we use for removing scale deposits.

Although it can harm the plaster, an acid wash causes less damage than the sander or sanding disks/ brushes, which tend to dig into the plaster and gouge out chunks at times.

I have heard that sandblasting can successfully be done but we have never tried it.

Larry
Swimming Pool Care Swimming Pool Maintenance
Swimming Pool Help Blog the Pool Help Blog
Solve Pool Problems with the Pool Wizard
Pool Care Forum - Swimming Pool Forums
User avatar
Larry
Pool Forums Admin
 
Posts: 308
Joined: December 2004
My Pool: inground concrete
tiled overflow pool
3 Hp pump
fiberglass sand filter
tiled deck

How to sand plaster?

Postby Aquaclear-NZ » Tue 14 Apr, 2009 03:39

as Larry said there is no easy way
last season we had an experiment with a Lo-Chlor product called Nail the Scale, with mixed results, in about 50% of the cases it worked well, 25% little change and 25% no change

the ones that worked, worked very well with large deposits softened to a point where brushing with a wire algae brush removed the softened deposit

DiamondBrite was experimenting with an additive to help soften the deposits as well (Lo-chlor blended this proprietary product in with another of their calcium scale removers)

Sulphumic acid is also very effective on calcium
Chocolate fish do not swim in hot water
Aquaclear-NZ
Pool Care Proficient
Pool Care Proficient
 
Posts: 32
Joined: March 2009
Location: Auckland
My Pool: ingound, 50,000L, gas heated, low energy pump and cartridge filter

How to sand plaster?

Postby blakeusa44 » Sun 15 May, 2011 11:32

You can wet or dry sand the plaster using 220 grit + and a soft backed buffing pad. Use a 7" polishing tool with a low speed. Just take your time. There is no other way to remove heavy scale.... acid only gets the top surface. Acid wash after. Wet sanding is best to keep the dust and heat down. Also wear a respirator.

A diamond wheel is the best but expensive... and it needs to be flexible- not rigid. Use baking soda blast on the tile line.
blakeusa44
 

How to sand plaster?

Postby Kiwi Pool » Sun 19 Jun, 2011 01:40

You will never get this sort of problem if you use Pool Quartz which is a 100% Quartz plaster
Kiwi Pool
 

How to sand plaster?

Postby kiwipool » Sat 06 Aug, 2011 00:18

Anonymous wrote:You will never get this sort of problem if you use Pool Quartz which is a 100% Quartz plaster

Re the Calcium Build Up. There are several reasons the water and the type of plaster one manufacture recomends the adding of Calplus every 6 months.

There is one chap who Grit blasts (using glass beads) but this is mainly on the water line tiles, using acid well to suggest that you would need to be a total idiot because it will possibly do more harm than you have now.

I would like to know what type of plaster you have on the pool.

You give now indication to where you are, if you are in NZ call me. I may be able to help you.
kiwipool
 

How to sand plaster?

Postby pg » Tue 20 Sep, 2011 18:00

I have sanded using a 220 grit red oxide sanding pad on a pole with the pool full. It was hard to keep in contact with the plaster surface due to the hydro dynamics of the pad shape wanting to "fly' the pad above the surface but worked very well in the shallow areas where the kids toes get worn down to a nub. But the scale came back faster it seems. I have color quartz plaster, 2 yrs old and a salt system in the los Angeles area.
pg
 

How to sand plaster?

Postby czechmate » Wed 21 Sep, 2011 11:55

It is a shame to experience calcium build-up in a 2 year old quartz based plaster.
First year it is almost impossible to get CH so much out of whack. It means it was severely neglected for the second year.
Use the POOL CALCULATOR from now on to monitor your CSI.
It will protect you from future problems.
You can try to use pumice stone fashioned in a holder for the deep. Any abrasive will have an impact on the surface surrounding the spot brushed.
But that is the price you pay for leaving the maintenance to a unqualified pool guy or not taking time to learning it yourself.
BTW, always double check the "friendly advices" you receive, when it concerns adding chemicals to your pool.
(The Kiwi guy is a prime example. If you have calcium build-up you do not want to raise CH. and quartz plaster is NOT 100% quartz. There is still a portland cement holding it together).
czechmate
Swimming Pool Superstar
Swimming Pool Superstar
 
Posts: 401
Joined: May 2009
Location: Texas
My Pool: 16 x 32 gunite21000 gal., Diamond Brite Blue, Swimquip XL pump, DE36

How to sand plaster?

Postby pg » Wed 21 Sep, 2011 15:24

Thank you for your responce .
I do my own testing and check 2 time a week 7.6 ph was my target but now I am shooting for 7.2 as the plasterer said since I check so often.
What do you mean "POOL CALCULATOR"
And yes I am disappointed in the calcium buildup.
pg
 

[Show] Post a reply

Next

Return to Pool Surface Staining & Discolored Pool Water


Pool Maintenance   •   Pool Wizard   •   Pool Help   •   Havuz Bakımı